 [. . . ] Please consult authorised dealer or specialist to clean the internal parts,  repair,  install,  remove and reinstall the unit.  improper installation and handling will cause leakage ,  electric shock or ﬁre. Conﬁrm with authorised dealer or specialist on usage of any speciﬁed refrigerant type.  [. . . ] After a long period of use,  make sure the installation rack does not deteriorate to prevent the unit from falling down. English Български Português Italiano Español Safety precautions Français

Remote control
Do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time.  New batteries of the same type must be inserted following the polarity stated. CAUTION Indoor unit and outdoor unit
Do not wash the indoor unit with water,  benzine,  thinner or scouring powder to avoid damage or corrosion at the unit. Power supply
Do not disconnect the plug by pulling the cord to prevent electric shock.  Unit selects operation mode every 10 minutes according to setting temperature and room temperature. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. POWERFUL/ QUIET

(Orange) (Orange) (Orange)

QUIET

OFF/ON

MODE

TEMP AIR SWING
POWERFUL/ / QUIET FAN SPEED

Press and hold for approximately 10 seconds to show temperature setting in °C or °F. To switch between powerful & quiet
QUIET NORMAL

TIMER ON 1 2

SET 3

POWERFUL

OFF

CANCEL
AC RC

Press to restore the remote control to default setting. POWERFUL: To reach temperature quickly
POWERFUL

SET CHECK CLOCK

RESET

• This operation stops automatically after 20 minutes.  qUIET: To enjoy quiet operation
QUIET

FAN SPEED

• This operation reduces airﬂow noise. To select fan speed

(Remote control display)

• For AUTO,  the indoor fan speed is automatically adjusted according to the operation mode.  To have low noise priority operation,  select the lowest fan speed ( ). Raise the front panel: • To use in AUTO mode,  press the button once.  To use in COOL mode,  press and hold the button until 1 beep is heard,  then release.  [. . . ] NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following conditions: • Abnormal noise during operation.  This may be due to damp smell emitted by the wall,  carpet,  furniture or clothing. Indoor fan stops occasionally during automatic • This helps to remove the surrounding odour.  [. . . ]